Double wall with legs (BPDX)

The vertical tanks with legs of BUPOLSA are designed for a specific installation that needs this arrangement of it. They can be with polyester legs (GRP) or galvanized carbon steel. It allows to position the tank at the desired height and at the same time to be able to directly support it on the concrete slab.

To comply with the APQ6 regulations, all connections to the tank must be located on the upper part of the tank: manhole, suction flange (usually with diver’s pipe) flange for filling and aeration(Installation instructions).

Dimensions

The range of storage volume of these tanks is very large depending on the diameter and the length of the shell of the same one, can reach up to 250m3. As well, we will be able to have the following capabilities:

 

VERTICAL TANKS OF DOUBLE-WALL WITH FLAT BASE
Ø (mm) CAPACITY (liters) HEIGHT (mm)
1.200 1.000 1.050
1.620 5.000 2.640
2.000 10.000 3.400
2.325 15.000 3.840
2.500 20.000 4.330
2.500 25.000 5.350
2.500 30.000 6.370
3.000 35.000 5.300
3.000 40.000 6.010
Ø (mm) CAPACITY (liters) HEIGHT (mm)
3.400 45.000 5.320
3.400 50.000 5.870
3.400 60.000 6.980
4.000 70.000 6.040
4.000 80.000 6.840
4.000 90.000 7.630
4.000 100.000 8.430
4.200 125.000 9.370
4.200 150.000 11.170


* Indicative table. To consult more capacities-dimensions, please contact our technical-commercial department.

Applications

Applications: vertical deposits are extended for the storage of liquid substances with a certain degree of dangerousness of storage:

  • Dangerous acids (nitric acid, sulphuric acid, sodium hypoclorite, hydroxide of sodium…
  • Hydrocarbons

PDF Sheet

 Product Sheet PDF