Dimensions
| CATCH BASINS | |||
| Type | LENGTH (mm) | WIDTH (mm) | HEIGHT (mm) |
| Double roughing “MEL” | 1.820 | 720 | 570 |
* For measurements other than those shown in the tables, please contact our technical-commercial department.
Double manual roughing catch basin
The body of BUPOLSA’s catch basins are made of fiberglass reinforced polyester (GRP). Connections are made of PVC pipe Ø200mm, and these basins are supplied together with the following accessories in stainless steel:
– detachable solid-harvesting basket
– rake in stainless steel
– roughing grid
Functioning
In water purification, a primary treatment must be done, which consists of removing all the material that floats. The installation of roughing grids is essential in any treatment plant, removing as much as possible of the thickest solids for direct disposal, in solid waste dumps, or by incineration.
Roughing chambers is achieved:
- Intercept materials which, due to their excessive dimensions, could hinder the operation of downstream equipment (decanters, purifiers, grease separators, flow meters, etc.).
- Avoid blockages in channels, pipes and conduits in general.
- Increase the efficiency of subsequent treatments.
Product Sheet PDF
